Polyamine for Water Treatment is a cationic coagulant grade for evaluating clarification of industrial water and suitable oilfield water streams. Polyamine coagulants interact with negatively charged colloidal material to help destabilize suspended particles before separation. Selection should be based on the water to be treated, the required outlet quality and the available mixing and separation equipment. Confirm the proposed grade specification and evaluate it using representative water samples before setting the operating dosage. Where other treatment chemicals are used, check compatibility and addition order as part of the trial. Provide water analysis, flow rate and the treatment objective when requesting a product recommendation.
Grade: Cationic coagulant grade
Main use: industrial water and oilfield applications
Polyamine for Water Treatment is a cationic coagulant grade for evaluating clarification of industrial water and suitable oilfield water streams. Polyamine coagulants interact with negatively charged colloidal material to help destabilize suspended particles before separation. Selection should be based on the water to be treated, the required outlet quality and the available mixing and separation equipment. Confirm the proposed grade specification and evaluate it using representative water samples before setting the operating dosage. Where other treatment chemicals are used, check compatibility and addition order as part of the trial. Provide water analysis, flow rate and the treatment objective when requesting a product recommendation.
| Product Category | Polyamine |
| Formula / Type | Cationic polyamine polymer |
| CAS No. | Confirm against the supplied grade SDS |
| Grade | Cationic coagulant grade |
| Appearance | colorless to light-yellow liquid |
| Application | industrial water and oilfield applications |
| Packaging | drums or IBC tanks |
Products | Content (%) | Viscosity |
Coagulants, Polyamine | 50% | Low, Medium, High |
Coagulants, Polyamine | 50% | Low, Medium, High |
Polyamine for Water Treatment is a cationic coagulant grade. Evaluate it for the intended water stream and clarification process before choosing an operating dosage.
A product recommendation should begin with the treatment objective, representative water analysis and a description of the existing process. Provide the flow rate, current chemical programme and required outlet quality so trials can address the conditions at the site.
Polyamine coagulants help destabilize negatively charged colloidal material. Conduct trials using representative samples and compare results at different dosages. Define the result to be measured, such as turbidity after separation, and use consistent test conditions when comparing options.
Coagulation performance depends on how the chemical is distributed and how the treated particles are subsequently separated. Record mixing conditions and the downstream settling, flotation or filtration arrangement when evaluating the trial result. A change in equipment or water composition can require the dosage to be reassessed.
Where a polyamine is combined with an inorganic coagulant or a flocculant, evaluate compatibility and addition order in the intended process. Test each component and the combined programme so the contribution of each chemical can be assessed before full-scale operation.
For an oilfield water enquiry, provide representative water composition and the required treatment or reuse objective. Assess the proposed coagulant through trials on that stream. Suitability for downstream use should be judged against the full water-quality requirements, rather than clarification alone.
Confirm the grade specification, viscosity test conditions, supplied concentration and handling instructions before ordering. Include the available dosing equipment and storage conditions in the enquiry so the supplied product and operating arrangements can be reviewed together.
Request a quotation with the intended application, required quantity, packaging requirement and delivery destination. Include trial results where available and confirm the agreed specification and documentation for the supplied grade.
Send your required grade, application, packaging, quantity and destination port. PAMPolymer will reply with product details and export pricing.
This polyamine product is listed as a cationic coagulant. Its suitability for a particular water stream should be assessed through coagulation trials and the performance of the downstream separation process. Begin with a representative sample and a clear treatment objective, such as reducing turbidity before the next process stage. Compare trial dosages under consistent mixing and settling conditions, and record the results against the required outlet quality. When combining the product with an inorganic coagulant or a flocculant, evaluate the addition sequence and each chemical separately before adopting a combined programme. For oilfield water applications, include the relevant water composition and operating conditions in the enquiry. Confirm product specifications, handling instructions and the agreed test methods for the supplied grade before delivery. Performance in one water stream should not be assumed to establish the operating dosage or result in another.